Clinical Evaluation of the Performance of Bionet Sphygmomanometer Modules Based on Protocol Presented by the International Organization for Standardization

NCT06609486 | Completed Results

• 1 other identifier: HKPark
• Study Type: interventional
• Target: 86
• Locations: 1 country
• Sites: 1

Brief Summary

According to INTERNATIONAL STANDARD (hereafter ISO) blood pressure (BP) monitor clinical evaluation protocol (ISO 81060-2:2018, Non-invasive sphygmomanometers- Part2: Clinical investigation of intermittent automated measurement type) for BN1 (BNiBP), an electronic sphygmomanometer module newly developed by Bionet Co., Ltd., the clinical group and evaluation criteria presented in, the effectiveness of blood pressure measurement performance was evaluated. The auscultation method used as a reference (gold standard) of a non-invasive blood pressure (NIBP) measurement method was used. The first blood pressure measurement was performed once each (reference BP not used for evaluation, R0; test BP not used for evaluation, T0) with auscultation and the test medical device (BM5 equipped with BN1 (BNiBP)). The blood pressure used for evaluation was measured four times by auscultation (first reference BP to fourth reference BP, R1 to R4) and three times by the test medical device (first test BP to third test BP, T1 to T3) alternately. A minimum interval of 1 min was allowed between each blood pressure measurement. Three data pairs (mean value of R1, R2 \& T1 / R2, mean value of R3 \& T2 / R3, mean value of R4 \& T3) were obtained from one study subject. This study aims to verify that the mean value of the differences and standard deviations of data pairs meet the criteria of ISO 81060-2:2018.

Conditions

Blood Pressure

Keywords

Hypotension; Hypertension; Prehypertension; Sphygmomanometers

Outcome Measures

Primary Outcomes (1)

• Test Device's Blood Pressure of Resting Condition

  The blood pressure used for evaluation was measured four times by auscultation (first reference BP to fourth reference BP, R1 to R4) and three times by the test medical device (first test BP to third test BP, T1 to T3) alternately. A minimum interval of 1 min was allowed between each BP measurement. Three data pairs (mean value of R1, R2 \& T1 / R2, mean value of R3 \& T2 / R3, mean value of R4 \& T3) were obtained from one study subject. Criterion 1 is that for valid data pairs, the mean value of the difference between the test medical device and the auscultation method BP (test device BP - auscultation BP) should be 5 mmHg or less and the standard deviation (SD) should be 8 mmHg or less. Criterion 2 is that, for study subjects, the ISO 81060-2:2018 for presenting different SD thresholds depending on the mean value of the difference should be satisfied. When mean value of the difference is ±1.6, ±0.0 mmHg, the SD should be less than 6.76 and 6.95 mmHg, respectively.

  Right after the experiment

Study Arms (1)

Blood pressure measurement group

EXPERIMENTAL

In this study, the protocol applied to automatic electronic blood pressure system module BN1 for performance evaluation is ISO's proposed "ISO 81060-2:2018 Non-invasive sphygmomanometers- Part2: Clinical investment of internal automatic measurement type". The initial BP measurement is performed alternately, measuring the blood pressure by the measurer and the test device once each, and measuring blood pressure by the measurer four times by the observer and three times by the test device.

Device: Blood pressure measurement group

Interventions

Blood pressure measurement group DEVICE

In this study, the protocol applied to automatic electronic blood pressure system module BN1 for performance evaluation is ISO's proposed "ISO 81060-2:2018 Non-invasive sphygmomanometers- Part2: Clinical investment of internal automatic measurement type". The initial BP measurement is performed alternately, measuring the blood pressure by the measurer and the test device once each, and measuring blood pressure by the measurer four times by the observer and three times by the test device.

Blood pressure measurement group

Eligibility Criteria

• Age: 3 Years+
• Sex: all
• Healthy Volunteers: Yes
• Age Groups: Child (0-17), Adult (18-64), Older Adult (65+)

You may qualify if:

• Recruitment is made through the recruitment notice for patients and their guardians who visit Hanyang University Hospital. Subjects who meet the criteria presented in ISO 81060-2:2018 Protocol 5.1 Subject requirements are recruited.

You may not qualify if:

• Emergency surgery patient
• Persons who have mental disorders such as mental retardation, autism, etc. and who have difficulty measuring blood pressure or are expected to have difficulties
• A person who disagreed with the study

Sponsors & Collaborators

• Hoon-Ki Park: lead
• Bionet Co., Ltd: collaborator

Study Sites (1)

Hanyang University Seoul Hospital

Seoul, 04763, South Korea

Location

Related Publications (6)

• Alpert BS. Validation of the Welch Allyn Spot Vital Signs blood pressure device according to the ANSI/AAMI SP10: 2002. Accuracy and cost-efficiency successfully combined. Blood Press Monit. 2007 Oct;12(5):345-7. doi: 10.1097/MBP.0b013e3282c9abf7.

  PMID: 17890975 BACKGROUND

• Coleman A, Freeman P, Steel S, Shennan A. Validation of the Omron 705IT (HEM-759-E) oscillometric blood pressure monitoring device according to the British Hypertension Society protocol. Blood Press Monit. 2006 Feb;11(1):27-32. doi: 10.1097/01.mbp.0000189788.05736.5f.

  PMID: 16410738 BACKGROUND

• Guidelines for Accuracy Evaluation of Electronic Sphygmomanometers - KFDA Food and Drug Administration

  BACKGROUND

• O'Brien E, Atkins N, Stergiou G, Karpettas N, Parati G, Asmar R, Imai Y, Wang J, Mengden T, Shennan A; Working Group on Blood Pressure Monitoring of the European Society of Hypertension. European Society of Hypertension International Protocol revision 2010 for the validation of blood pressure measuring devices in adults. Blood Press Monit. 2010 Feb;15(1):23-38. doi: 10.1097/MBP.0b013e3283360e98. No abstract available.

  PMID: 20110786 BACKGROUND

• Stergiou GS, Alpert B, Mieke S, Asmar R, Atkins N, Eckert S, Frick G, Friedman B, Grassl T, Ichikawa T, Ioannidis JP, Lacy P, McManus R, Murray A, Myers M, Palatini P, Parati G, Quinn D, Sarkis J, Shennan A, Usuda T, Wang J, Wu CO, O'Brien E. A universal standard for the validation of blood pressure measuring devices: Association for the Advancement of Medical Instrumentation/European Society of Hypertension/International Organization for Standardization (AAMI/ESH/ISO) Collaboration Statement. J Hypertens. 2018 Mar;36(3):472-478. doi: 10.1097/HJH.0000000000001634.

  PMID: 29384983 BACKGROUND

• International Organization for Standardization. Noninvasive sphygmomanometers: part 2: clinical investigation of intermittent automated measurement type. (2018): 36.

  BACKGROUND

MeSH Terms

Conditions

Hypotension; Hypertension; Prehypertension

Condition Hierarchy (Ancestors)

Vascular Diseases; Cardiovascular Diseases

Results Point of Contact

• Title: Jongshill Lee, Ph.D.
• Organization: Hanyang University Seoul Hospital

netlee@hanyang.ac.kr

+82-10-6209-4260

Study Officials

• Hoon-Ki Park, M.D., Ph.D.

  Department of Family Medicine, Hanyang University Seoul Hospital

  PRINCIPAL INVESTIGATOR

Publication Agreements

• PI is Sponsor Employee: Yes

Study Design

• Study Type: interventional
• Phase: not applicable
• Allocation: NA
• Masking: NONE
• Masking Details: In this study, the protocol applied to automatic electronic blood pressure system module BN1 for performance evaluation is ISO's proposed "ISO 81060-2:2018 Non-invasive sphygmomanometers- Part2: Clinical investment of internal automatic measurement type". The initial BP measurement is performed alternately, measuring the blood pressure by the measurer and the test device once each, and measuring blood pressure by the measurer four times by the observer and three times by the test device.
• Purpose: DIAGNOSTIC
• Intervention Model: SINGLE GROUP
• Sponsor Type: OTHER
• Responsible Party: SPONSOR INVESTIGATOR
• PI Title: Professor

Model Details: In this study, the protocol applied to automatic electronic blood pressure system module BN1 for performance evaluation is ISO's proposed "ISO 81060-2:2018 Non-invasive sphygmomanometers- Part2: Clinical investment of internal automatic measurement type". The initial BP measurement is performed alternately, measuring the blood pressure by the measurer and the test device once each, and measuring blood pressure by the measurer four times by the observer and three times by the test device.

Study Record Dates

• First Submitted: September 20, 2024
• First Posted: September 24, 2024
• Study Start: June 1, 2020
• Primary Completion: July 21, 2021
• Study Completion: July 23, 2021
• Last Updated: March 3, 2025
• Results First Posted: March 3, 2025

Record last verified: 2025-02

Data Sharing

• IPD Sharing: Will not share

Locations

KR (1)