Study Stopped
Not enough patients having fever symptoms
Fever Algorithm Development of a Non-invasive Wearable Core Body Temperature Sensor System in Intensive Care Unit Patients
1 other identifier
interventional
20
1 country
1
Brief Summary
Background and Rationale: The gold standard to assess fever, is to conduct invasive intravascular, esophageal or bladder thermistor core body temperature (CBT) measurements. Since these methods are time consuming for the medical staff and more importantly displeasing to the patients, alternative CBT/fever assessments is needed. greenTEG is developing a CBT algorithm that will be able to reliably calculate CBT continuously form skin temperature (ST) and the corresponding heat flux (HF). This can be achieved from subjects developing fever in intensive care unit, since the prevalence of fever is high and optimally assessed. Objective(s): The aim of this study is to develop and validation of an algorithm that allows the detection of fever in patients through a non-invasive wearable prototype sensor, which calculates CBT from ST, HF and heart rate (HR) data streams, allowing a more effective patient management Endpoint(s): ST, HF, HR and CBT data are collected for at least 24hrs until 3 day, depending on the ICU length of stay of the patient. ST, HF, HR and CBT values from different measurement positions (subclavicular, lateral ribcage, upper arm and wrist) of the non-invasive wearable research prototypes will be compared with each other and compared to clinical invasive method particularly CBT measured by blood temperature from a pulmonary catheter if present or vesical temperature Study Design: Interventional-Single Group Assignment, monocentric, open label. Statistical Considerations: The measure of quality will be the mean absolute difference (MAD) between the CBT prediction and the reference signal where the mean is taken over the whole measurement of a single candidate. An aggregate performance measure over a group of candidates is defined by averaging the MAD values of each candidate in the group. When a group of candidates for algorithm validation is defined, the total improvement will be defined by comparing aggregate performances of old and new algorithm for the validation group. Balancing the probability of occurrence of the factors in the population and the overall size of the study, a final size of 50 candidates is reasonable. Inclusion- / Exclusion Criteria: Inclusion criteria:
- Age ≥18 years old.
- Patients which are treated at the cardiosurgical and vascular intensive care unit of the University Hospital Zurich.
- Expected length of stay in the intensive care unit at least 24 hours
- Clinical standard monitoring including an invasive CBT measurement (e.g. blood temperature from a pulmonary catheter if present or from a vesical catheter routinely placed)
- Informed consent signed by the patient Exclusion criteria:
- Acute medical contraindications against the measurement of the non-invasive wearable device (e.g. skin diseases) and band-aid allergies.
- Implanted pacemakers or other implanted life sustaining devices
- Comatose state of the patient
- Pregnant Women Number of Participants with Rationale: Number of participants in the study :50 candidates. The study will be divided in two parts. In the first part data are collected from 38 patients. In the second part, data form 12 patients will be collected. The reason for the first part is to collect data in order to develop the algorithm. The reason to collect additional data from 12 candidates in the second part is to validate and adjust the algorithm that is develop in the first part of the study. Study Intervention: 50% of the research prototypes (4 pieces) will be mounted to the patient on left side of the body (sub clavicula, lateral ribcage, upper arm and wrist), after being admitted to the ICU and having signed the informed consent. As soon as a patient gets fever, the other 50% of the research prototypes (4 pieces) will be applied on the right side of the body (sub clavicula, lateral ribcage, upper arm and wrist). Control Intervention: Not applicable Study procedures: Patients will be recruited and screened 1-3 days before the measurements starts. 50% of the research prototypes (4 pieces) will be applied to the patient on the left side of the body (sub clavicula, lateral ribcage, upper arm and wrist), after being admitted to the ICU and having signed the informed consent. After the development of the fever, the other 50% of the research prototypes (4 pieces) will be applied on the right side of the body (sub clavicula, lateral ribcage, upper arm and wrist). At the end of intervention all prototypes will be removed from the patient. A greenTEG employee will collect all the prototypes.
Trial Health
Trial Health Score
Automated assessment based on enrollment pace, timeline, and geographic reach
participants targeted
Target at below P25 for not_applicable
Started Dec 2019
1 active site
Health score is calculated from publicly available data and should be used for screening purposes only.
Trial Relationships
Click on a node to explore related trials.
Study Timeline
Key milestones and dates
First Submitted
Initial submission to the registry
November 21, 2019
CompletedFirst Posted
Study publicly available on registry
December 2, 2019
CompletedStudy Start
First participant enrolled
December 11, 2019
CompletedPrimary Completion
Last participant's last visit for primary outcome
January 31, 2021
CompletedStudy Completion
Last participant's last visit for all outcomes
March 31, 2021
CompletedAugust 16, 2021
August 1, 2021
1.1 years
November 21, 2019
August 9, 2021
Conditions
Outcome Measures
Primary Outcomes (2)
Continuous and non-invasive skin temperature and heat flux
Skin temperature and heat flux data collected continuously and non-invasively using research prototypes at different measurement positions (subclavicular, lateral ribcage, upper arm and wrist).
Participants will be monitored continuously and unobtrusively with the research prototypes over a 1-3 day time period, depending on the stationary stay in the ICU of the hospital.
Continuous and invasive core body temperature
Core body temperature data will be collected using the clinical standard method, which will be used to monitor patients on the ICU (pulmonary catheter or vesicular temperature).
Data used will be limited to the time frame, where non-invasive CBT methods are applied (research prototype). This will be 1-3 days, depending on the stationary stay of the patient.
Secondary Outcomes (9)
Heart rate
Data used will be limited to the time frame, where non-invasive CBT methods are applied (research prototype). This will be 1-3 days, depending on the stationary stay of the patient.
Administration and dose of medication
Data used will be limited to the time frame, where non-invasive CBT methods are applied (research prototype). This will be 1-3 days, depending on the stationary stay of the patient.
Blood pressure
Data used will be limited to the time frame, where non-invasive methods are applied (research prototype). This will be 1-3 days, depending on the stationary stay of the patient.
ECG
Data used will be limited to the time frame, where non-invasive CBT methods are applied (research prototype). This will be 1-3 days, depending on the stationary stay of the patient.
Blood oxygen saturation
Data used will be limited to the time frame, where non-invasive CBT methods are applied (research prototype). This will be 1-3 days, depending on the stationary stay of the patient.
- +4 more secondary outcomes
Study Arms (1)
Unobtrusive data collection
OTHERUnobtrusive data collection using noninvasive sensor systems.
Interventions
50% of the research prototypes (4 pieces) will be mounted to the patient on left side of the body (sub clavicula, lateral ribcage, upper arm and wrist), after being admitted to the ICU and having signed the informed consent. As soon as a patient gets fever, the other 50% of the research prototypes (4 pieces) will be applied on the right side of the body (sub clavicula, lateral ribcage, upper arm and wrist). Data will be collected unobtrusively (no diagnosis will be made) and used for fever detection algorithm development.
Eligibility Criteria
You may qualify if:
- Age ≥18 years old.
- Patients which are treated at the cardiosurgical and vascular intensive care unit of the University Hospital Zurich.
- Expected length of stay in the intensive care unit at least 24 hours
- Clinical standard monitoring including an invasive CBT measurement (e.g. blood temperature from a pulmonary catheter if present or from a vesical catheter routinely placed)
- Informed consent signed by the patient
You may not qualify if:
- Acute medical contraindications against the measurement of the non-invasive wearable device (e.g. skin diseases) and band-aid allergies.
- Implanted pacemakers or other implanted life sustaining devices
- Comatose state of the patient
- Pregnant Women
Contact the study team to confirm eligibility.
Sponsors & Collaborators
- greenTEG AGlead
- University of Zurichcollaborator
Study Sites (1)
University Hospital Zurich
Zurich, 8091, Switzerland
MeSH Terms
Conditions
Interventions
Condition Hierarchy (Ancestors)
Intervention Hierarchy (Ancestors)
Study Officials
- PRINCIPAL INVESTIGATOR
Dominique Bettex, Prof. Dr.
University of Zurich
Study Design
- Study Type
- interventional
- Phase
- not applicable
- Allocation
- NA
- Masking
- NONE
- Purpose
- OTHER
- Intervention Model
- SINGLE GROUP
- Sponsor Type
- INDUSTRY
- Responsible Party
- SPONSOR
Study Record Dates
First Submitted
November 21, 2019
First Posted
December 2, 2019
Study Start
December 11, 2019
Primary Completion
January 31, 2021
Study Completion
March 31, 2021
Last Updated
August 16, 2021
Record last verified: 2021-08